Instructions Instructions

Welcome to a world where imagination becomes real. After plugging in your Stickerbox, follow the instructions below to get started.

1. connect your stickerbox 1. connect your stickerbox

Connect through the Stickerbox App (the easiest option):

  1. Download the Stickerbox App
Logo 1
Logo 2

2. Scan the QR displayed on the Stickerbox from within the app
3. Select your prefered Wifi network from the list
4. Enter your Wifi password
5. A 6-character code will display on the Stickerbox screen, please input this on the app
6. Click 'Link Device'

  1. Click the white button at the top of the Stickerbox to display the alternative setup
  2. Open your phones Wi-Fi settings and select the network name displayed on the Stickerbox screen
  3. After selecting this network, a pop-up will display on your phone
  4. Select your Wi-Fi network, input your network password, and click 'connect'
  5. Go to stickerbox.com/setup and input the code displayed on the Stickerbox

2. Load the paper 2. Load the paper

New Stickerbox units come with paper preloaded, so you're ready to print right away. When you need to load a new roll: have an adult unscrew the silver screw at the bottom with a #2 Phillips screwdriver or equivalent. Lift the door, load the paper with the printable side facing front, and close it back up. Don't over-tighten.

Stickerbox screw location

Have an older unit without a screw? Just push underneath to open the door instead. Watch how →

3. make your first sticker! 3. make your first sticker!

Press and hold the white button, say a prompt like "a ghost with sunglasses riding a skateboard," and watch your idea print!